Before & After Photos

This home's front porch was sinking into the soil. The sinking was resulting in gaps between the porch and the home. We aimed to seal the porch back to the home using PolyLevel foam, which is injected under the porch. The foam expands, and raises the porch back to a precise, calculated level. We then seal the reduced gaps using NexusPro sealant, which will not allow water to reach into the cracks.

In order to get this front porch back to how it was originally, we had to use our PolyLevel foam. We inject our Polylevel foam under the front porch to raise and level all the different parts of the concrete slabs to make them even again. In order to inject the foam, we only have to drill tiny pea-sized holes in the concrete slabs, which are very inconspicuous. After we level everything out, we then sealed all the gaps and cracks with our NexusPro sealant. The result is a front porch that won't settle again for a long time. Side note: The homeowner took out the flower beds near the front porch so we could have some room to maneuver, that's why you don't see them in the after photo. 

We used Polylevel Injection to raise a sidewalk slab in Beavercreek, Ohio.  In this case, you can see how the sunken concrete slab has raised the stones on this walkway, causing a tripping hazard.  After the Polylevel Injection is done, the sidewalk is now flat and can now be walked on safely. 

The front porch on one of our customers houses was sinking. They needed it raised, so we helped them out. Our poly service was able to restore the porch to its original height and keep it there. 

Polylevel injection foam was injected underneath the concrete slab.  This foam fills the void underneath the slab and raised the slab.  The joints of the slabs are sealed with NexusPro joint sealant to prevent water intrusion.