Before & After Photos

This home had some driveway slabs near the garage that had sunk, making it difficult to pull into the garage.  We used the Polylevel injection system to resolve this problem.  Now the Slab is level with the garage floor, and it will be much easier to use the garage. 

Garages and Driveways are one of the most common places we are asked to help raise. Often times the slabs on the driveway sink below the level of the garage, which can be seen here. We successfully raised the slabs by a couple inches to make the garage smoother. 

This driveway in Hamilton, OH was uneven because the soil sitting underneath the concrete was shifting. The uneven driveway had multiple gaps and cracks in it, creating multiple safety hazards. We were able to lift and seal the driveway with our foam jacking methods, resulting in a driveway without tripping hazards. Our foam jacking system requires us to drill multiple pea sized holes in the concrete, then we inject foam through them. We then seal all the gaps and holes in the concrete with our sealer, resulting in a for sure way to make your concrete last longer.

This home's back porch had slabs that were sinking and retracting away from one another, leaving open space between the slabs. This open space allows rain to erode the slabs from underneath. In order to fix the slabs, we applied PolyLevel foam in the right spots to move the slabs back to their intended positions. We also sealed the spaces between the slabs to stop from further erosion. 

This front porch was sloping sideways, and it needed fixed. The front porch is the first step someone takes to leave the house, and it should not be a hazard, so we fixed it.