Before & After Photos

Larry Y. from Seminole, FL had a problem with his home's walkway due to sinking concrete, which caused a trip hazard. To fix the issue, Larry opted for LRE's two-part concrete protection solution. Firstly, PolyLevel was used to restore an even level to the concrete slabs. Then, NexusPro was used to seal the expansion joints and cracks. By using these two solutions together, Larry's walkway was repaired, eliminating the trip hazard and providing permanent protection against future concrete damage.

Larry Y. from Seminole, FL, contacted LRE Foundation Repair about a sunken concrete slab that posed a trip hazard leading to his front porch. After conducting a thorough home inspection, our Design Specialist determined that soil settlement was causing the issue. The homeowner decided to go for our two-part concrete solution to address the problem. We used Polylevel to level the concrete slab and applied NexusPro to the control joints. As a result, Larry's walkway is now restored and protected, ensuring that there is no more trip hazard.

After noticing a section of his concrete driveway had sunk, Joseph from Seminole, Florida, contacted LRE Foundation Repair for a solution. We sent one of our expert Design Specialists, who discovered that significant soil settlement had caused the driveway to sink and become uneven. After consulting with Joseph, our team quickly injected PolyLevel beneath the concrete to lift, level, and stabilize the slabs. Joseph’s driveway is now restored to its proper level, resolving any concerns about its stability.

Virginia’s driveway in Palm Bay, Florida, had suffered extensive settlement damage, with large cracks spreading across the surface and sections of the slabs sinking, creating dangerous tripping hazards. To avoid the cost of a full concrete replacement, she reached out to LRE Foundation Repair for help.

During the inspection, our Design Specialist identified significant soil washout beneath the driveway as the cause of the cracking and settling. To address the issue, our team implemented the Two-Part Concrete Protection System. First, PolyLevel was injected beneath the driveway to lift and level the sunken slabs while stabilizing the soil. Then, NexusPro was applied to seal the cracks and joints, preventing water intrusion and improving the driveway’s appearance.

With the repairs complete, Virginia’s driveway is now fully stabilized and level, providing a safe, long-lasting solution without the need for costly replacement.

Edward in Pinellas Park, Florida, contacted us at LRE Foundation Repair with a concerning issue with his concrete driveway. The slabs positioned above a culvert pipe had broken off and settled onto the pipe itself, creating a major dip and tripping hazard in the driveway, while also crushing the pipe. One of our Design Specialists visited Edward’s home and discovered a significant amount of soil had washed out from beneath the driveway, creating a void that caused the slabs to lose their support and sink in the process. Our production team used PolyLevel by injecting the two-part polymer foam directly underneath the concrete slabs to fill the void and level the slabs. The concrete slabs are now back to their proper, even level, and the void below is completely filled, providing Edward with the peace of mind that his concrete driveway is now permanently stabilized.