Before & After Photos

There wasn't proper support under a deck in Saint Louis, MO, causing its floor to sink and slope. To solve this issue, the SmartJack System was installed. These will stabilize the deck from below, lift the floors above back up, and keep them in place. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. This deck will remain stable and restore peace of mind for years to come!

Support posts were failing in a basement in Saint Louis, MO, causing the floor beams to crack. To solve this issue, the SmartJack System was installed. These are steel support systems that can permanently stabilize and level the floor joists and girders in a basement. These add strength and stability to the existing columns and piers. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!

This St. Louis homeowner's basement ceiling was starting to sag due to water damage, so the SmartJack support system was installed. This pushes up and supports the beams in the ceiling of the basement, keeping it from sagging and stabilizing the floor above. Now this customer will have peace of mind for years to come.

A basement in Saint Louis, Missouri, had some cracks starting to appear in the foundation walls. Most likely this is caused by moving ground soils as the temperature heats and cools over time. To address this issue, Woods came in and installed the Push Pier System. These will permanently stabilize the foundation, and in many cases, lift it back toward its original position. These can also close cracks and improve the operation of windows and doors. This is the least risky solution when the soil conditions are unknown. There is minimal disturbance from installation; installing them is a quick process and will solve the problem once and for all!

A basement in St. Louis, Missouri, had some supports that were starting to fail due to foundation settlement. This was causing the floors above to sag and needed to be addressed right away. Woods came out and installed the SmartJack System. This system consists of custom cut steel beams. They are placed in galvanized fill to equally distribute the weight of the building. They can be tightened over time. This allows maintenance to be done as the ground continues to shift without requiring another costly install. Thanks to the SmartJack System, this building will be stabilized for years to come.