Before & After Photos

Dampness, rot, and rodents are not how you want to describe the conditions of your crawl space, but for this Hancock, ME homeowner, this is the reality. After owning the home for 15 years and looking to eventually make this their forever home, the homeowner called TC Hafford Basement Systems for help.

System Design Specialist Nima Farshid met with the homeowner and spent time in the crawl space to design a system that would meet the needs of the home and the expectations of the homeowner. This included removing the old insulation and debris so that the work could begin. CleanSpace with Drainage Matting was laid down to create an inorganic barrier that keeps the outside elements where they belong. Encapsulating the crawl space ensures that wind, moisture, and critters can’t cause damage to the home. Wanting to make sure the home stays energy efficient, Spray Foam was installed to seal and insulate the area. Finally, a CleanSpace Vent Cover was installed to fully encapsulate the crawl space.

The homeowner can rest easy knowing their home is protected from the elements and is more energy efficient, saving them money on their energy bill in the future.

With a large crack running along their garage floor due to uneven footing beneath, this homeowner was looking to redo their slab. After calling our office staff at TC Hafford Basement Systems and receiving their free estimate, this homeowner hired us to get the job done. Our crew got started by excavating the damaged area of concrete to pour a fresh slab. Once dried in place, PolyLevel was injected through the slab to fill any gaps below with expanding foam. This will create a level platform to hold the slab in place, eliminating any uneven terrain below that might lead to future cracking.

With a new garage slab in place supported by a PolyLevel injection, this homeowner's garage floor will remain flush with their driveway and crack free for many years to come!

Living with a large crack in their concrete basement wall, this homeowner was no stranger to having water leak into their basement. To put an end to the problems caused by this crack, the homeowner hired us at TC Hafford Basement Systems. As soon as our installation crew arrived, they were able to begin work sealing the crack with a FlexiSpan seal. This three-layer seal with a foam core adheres to the length of the crack and is capable of slight bends to conform to any shifts in the overall shape of the crack while maintaining a water-tight bond. Now this homeowner can make use of the space surrounding the crack without needing to be concerned about potential water damage from leaking moisture!

With several leaking cracks in the walls of their basement, this Dexter, ME homeowner needed a more permanent method to keep the water at bay. After calling us at TC Hafford Basement Systems and receiving their free estimate, this homeowner was able to find the solution they were looking for. Upon arrival at the home, our installation crew got started on sealing these cracks by preparing the area surrounding each crack; using a coarse brush to remove any debris. Next, an initial layer of sealant was laid within each crack. This was covered by a foam core and a second layer of sealant to hold the core in place. This structure known as a FlexiSpan seal will lock out any leaking moisture while also maintaining flexibility to adhere to the crack even if the wall should shift slightly over time. With the cracks in their basement sealed with FlexiSpan, this homeowner can now make use of their basement without water causing damage to their property.

These FlexiSpan seals will maintain a dry basement for this Dexter, ME homeowner for many years into the future! Their leaky, damp basement is now a thing of the past!

Looking for a way to seal a couple cracks that had opened along the concrete wall in their garage, this Corinth, ME homeowner called us at TC Hafford Basement Systems to ask about a free estimate. Shortly after they met with our sales representative and reviewed their options, they gave us the go-ahead to begin work on the crack-repair. As soon as our installation crew arrived at the property, they prepared the cracks by brushing them clear of debris using a coarse brush. Once clear, the cracks were covered by an initial layer of sealant. This was quickly covered by a foam pad running the length of each crack. The foam was then covered by a second layer of sealant, completing the FlexiSpan seal over the cracks. The foam core within these seals allows them to bend and remain water-tight against the wall should the concrete walls shift slightly in the future.

With their new seals in place over these cracks, this homeowner Will no longer need to be concerned about water leaking into the garage and polling up on the slab. The FlexiSpan seals will keep this wall water-tight for years to come!