Before & After Photos

Pre-existing inefficient pump replaced by newer, effective pump!

Our team was called by a homeowner in Dudley, MA who was looking to fix a crack in the wall of their basement. An inspector went out to inspect the problem and decided using Flexispan would be the best solution for this home. Our crew cut the finished walls as necessary to install the Flexispan crack repair system, which was placed from the top to bottom of the crack. 

Flexispan differs from other crack fillers or sealents in two major ways. First, Flexispan eliminates the use of messy expoxy injections and instead seals the crack with a flexible sealent that will stop water seeping through the crack. The other key factor in our Flexispan system is that it doesn't end with sealent. Our system uses an additional step to make sure that no seepage will make it pass the sealent. A second layer of  beveled foam is used, which would drain any small amount of additional seepage down into your drainage system or into a small drywell created under the basement floor. 

WaterGuard is the drainage system DryZone uses around the perimeter of the basement to stop water from entering through the floor/wall seam. This property in Westerly, RI needed the WaterGuard installed right where the basement stairs were! We came in and removed the lower stair treads to install the WaterGuard system and put them right back when we were done!

In Westerly, RI the basement of this condo was dealing with a large wall crack that was letting water seep onto the floor. For this crack we used our Flexispan system to seal the crack and prevent further leakages. The process includes cleaning out the crack and adding two layers of sealant, one that goes inside the crack one that creates a drainage channel over the crack. With the channel there, any water that could leak after the repair will get caught and stay off the basement floor. Then we put a layer of CleanSpace over the whole system for another layer of protection.