Before & After Photos

Deanna H. of Chippewa Falls, WI had water leaking into her basement and she wanted to get it inspected as soon as possible. She got in contact with our office staff and scheduled a FREE Estimate with our Design Specialist, Charles Haldeman. Charles went to her home, inspected her problems, and came up with a solution. Deanna was comfortable with the presentation, products, and warranties, so she scheduled an installation date. 

Our Foreman, Raul Barroso, and his production team began the project by breaking out the concrete floor perimeter, forming a trench. In the trench, our team installed our WaterGuard System, which is made to collect water seepage from basement walls and act like an underground drainage system. Next, our team installed our FoamMax Wall Panels, which is a foam insulation panel with a white foil on the front and foil vapor barrier on the back. This wall insulation makes the basement much warmer, makes it brighter, and it can be left exposed. To complete the project, our crew covered the open gaps with rock and replaced the concrete. Deanna was satisfied with the project, and appreciated all efforts involved! 

Carolyn V. of Chippewa Falls, WI had an uneven driveway apron, making her worry about the curb appeal of her home. Our Design Specialist, Marcus, provided her with a quote going over our PolyLevel and NexusPro concrete systems. Carolyn was confident in Marcus's proposal, so she went ahead with the project. 

Our Foreman, Dylon M., and his crew member injected our PolyLevel underneath the concrete slabs to stabilize the surface and fill the voids caused by soil erosion. Next, our crew applied our NexusPro over the cracks to seal them and prevent moisture from seeping underneath. The project was complete within a couple of hours and Carolyn was satisfied with the way it looked when it was done! 

We provide FREE estimates for all of our services. Give us a call today to schedule yours! 

Jean G. of Chippewa Falls, WI has lived in her home for five years and never goes downstairs. She recently did and she noticed a musty smell and damp floors. She called American Waterworks and scheduled a FREE estimate with our Design Specialist, Chad. Chad went to Jean's house, thoroughly inspected her basement, and proposed the solution of our WaterGuard Below the Floor Drain and CleanSpace Wall System Vapor Barrier. Jean was confident in both products and systems, so she went ahead with the project. 

Our Foreman, Raul B., and his crew began the project by breaking out the concrete floor perimeter, forming a trench. In the trench, our crew installed our WaterGuard, which is an interior drainage system that prevents mud clogs and collects water leakage from basement walls. Next, our crew installed our CleanSpace Wall System Vapor Barrier, which is designed to prevent water from seeping through the walls and save money on energy costs. To complete the project, our crew filled the open-floor gaps with river rock and applied a new layer of concrete over them. 

Jean was happy with the project and could no longer sense the musty odors! 

We provide FREE estimates for each of our products and services. Click here or give us a call today. 

A homeowner in Chippewa Falls, WI was cleaning his basement when he noticed one of the wall's base panels was damp. He began to check the other walls and became concerned when he found the same issue throughout the whole basement. He decided not wait and let the issue continue growing worse and immediately began searching for solutions. The homeowner came across the American Waterworks and was interested in signing up for one of our FREE estimate appointments. We decided to send over Design Specialist Daniel Reinke to take a look at the basement and give his recommendations. Daniel explained that with this kind of issue, the basement needed to be fully waterproofed with the installation of our WaterGuard system around the basement perimeter. He explained that our WaterGuard is the premier choice for below-floor drains, as it stays on top of the footing and out of the "mud zone" where other drains of it's kind normally clog. The homeowner was pleased that there was a solution and agreed to the recommendations. When it was time for the installations, Foreman Lane Schlobohm crew arrived at the home, ready to complete the project. Lane and his crew successfully installed the WaterGuard and the homeowner was beyond happy to have a clean water-free basement back.

If you're struggling with a similar situation, or have concerns about your basement or water intrusion, schedule your free no-obligation estimate by clicking HERE.

A Plainview, MN, homeowner noticed that each time it rained, he could see tiny droplets of water entering his basement walls and eventually resting on his basement floor. Not wanting the issue to persist, he reached out to American Waterworks, as we had done work on his home before. He called our office to claim a FREE estimate, and several weeks later, our Design Specialist, Ryan K, headed to the home. 

Ryan took his time inspecting the basement, and when he finished, he met with the homeowners to deliver his recommendations. Ryan explained that because of how and where the water was entering, he was recommending two of our products to address the problem. First, Ryan wanted to install our WaterGuard around the perimeter of the basement. He explained that our WaterGuard is a unique French drain that gets installed below the floor slab but atop the footing of the foundation of the home. This way, the drain stays out of the mud zone, where other drains of its kind tend to clog. It works to collect water entering through the floor and the wall, directing it to the appropriate disposal site. Because the homeowner had a previous system installed, Ryan informed him that the WaterGuard could be connected to their existing sump pump. Next, Ryan wanted to use our CleanSpace to address the water entering through the wall. This 100% waterproof plastic vapor barrier is the perfect solution for unfinished basement walls. The plastic-like material gets adhered directly to the walls, and works to direct water down into the WaterGuard, and eventually to the sump pump. The homeowner liked that the new recommended system could work with the previously installed sump pump, and decided to schedule the project for several weeks later. 

On the day of the project, our Production team, led by their Foreman, Jorge M, installed 150 ft of WaterGuard and 146ft of CleanSpace throughout the basement. Now, our customer can enjoy their dry, healthy space! 

Do you have a damp basement that needs addressing? Click HERE to take the first steps in your basement waterproofing journey!