Before & After Photos

With the subfloor reading at a moisture level of 44.7%, this home was in desperate need of some moisture control and waterproofing. The subfloor and joists were literally wet to the touch due to the crawlspace being open to the outside elements. Another contributing factor to this moisture problem was the fiberglass insulation that was originally installed. Sadly, this product does more harm than good under the house by absorbing water like a sponge and keeping it nestled close to the wooden parts of the foundation. This always leads to mold and rot, creating problems down the road. 

Our team was able to clean out the falling insulation and debris, install a sump pump in the ground, and encapsulate and seal off the crawlspace. We also include a dehumidifier that will help maintain the dry atmosphere under the home. We left with a happy homeowner!

Moisture and mold were growing in this homeowner's crawlspace. When she found the insulation was holding water right up under her floors, she knew she had to do something. Corey Becker inspected the crawlspace and was able to provide a solution for her home. We removed the soaked insulation and sealed off the crawlspace. Then we installed our 20 mil CleanSpace liner, sump pump, and dehumidifier to permanently and effectively protect the crawlspace from moisture intrusion, mold, and rot. 

The damp and dirty underside of this home had been causing the homeowner plenty of problems. Most notably, buckling floors throughout their home caused by the moisture. This before/after partly displays how we fixed that problem, it is hard to miss that bright and shiny CleanSpace Liner! This durable barrier is used to block out moisture seepage from the ground and lead it to sump pump. It works amazing with out crawlspace dehumidifier, which handles the humidity. We're proud of the transformation here!

Our MOLD-X2 treatment is a powerful spray we use to help the crawlspace get rid of mold. It works in seconds, safely eliminating mold spores and stains. 

We always recommend encapsulation when mold is present so we can treat the underlying issues. Otherwise, mold treatment is just a bandaid that will eventually have to be redone. 

This dental clinic in Laurel, MS was sitting on top of a crawlspace filled with moisture and mold. Obviously, this isn't good since most of the air we breathe inside travels up from the under the structure. Our team was able to go out and do a full inspection of the crawlspace. We were able to show the owner our encapsulation process and how it fixes their issue. They liked our system and felt it would suit their needs. We removed the debris that filled the crawlspace and installed our waterproofing system. We left with a happy customer!