Before & After Photos

Click on a photo to enlarge.

Repairing broken concrete in Overland Park, KS

This customer wanted to fix the concrete in his driveway. The driveway had cracked all across one of the concrete slabs and into the other sections of the driveway. We were able to level the slabs and broken chunks with our polylevel foam and sealed the crakes and joins with nexus pro to prevent water from getting under the concrete. This fixed his concrete without having to replace the entire driveway. 

Driveway Repair in Overland Park, KS

This driveway in Overland Park, KS had large joints that were allowing water to penetrate the concrete slabs. This can cause major damage to the driveway and can also harm vehicles. To fix this, we sealed the joints with NexusPro, a long-lasting and durable silicone-based solution. 

Sunken Concrete Fixed with Poly Foam

This sidewalk was experiencing settlement and gaps so severe the City told them to get it fixed or they will be charged for a replacement. We were able to fix the concrete by injecting PolyLevel foam to lift and level the concrete slab back to its original position! 

Joints Repaired in Maryville, MO

This Maryville homeowner had wide cracks in their driveway along with some uneven surfaces in the concrete. Not only are cracked concrete surfaces bad for your tires, but they also can sink your home's curb appeal! For this job, we lifted and leveled the surface using PolyLevel, a foam that is injected under the surface of the concrete. Then to seal up those cracks we used our NexusPro silicone-based joint sealant. 

Concrete Repaired in Stilwell, KS

The homeowner in Stilwell, KS was struggling with their concrete leading from the driveway up to the front steps. There was major settlement that had occurred and it was becoming a trip hazard. Worried that it would become worse and other parts would also start to settle, they decided to call Thrasher.

The crew was able to identify that major settlement had occurred because the soil underneath had washed away due to exposed joints. We used PolyLevel to bring the slab back up to the original level, getting rid of the trip hazard. Then to seal the joints we used NexusPro Joint Sealant to close up the exposed joints and prevent water from entering. The customer was extremely happy to never have to worry about tripping over their concrete again.