Before & After Photos

When Basement Design Specialist Mike Fiorillo met with this customer about sagging floors in the home above the crawl space, he proposed a permanent solution to his foundation issues. The SmartJack Support System, which includes corrosion-resistant galvanized steel adjustable support columns that can support over 60,000 lbs.were installed by foreman Jonathan Neira and his crew to provide immediate and permanent stabilization and to restore stability.     

This homeowner in Belvidere, New Jersey noticed their walls were cracking and starting to bow inwards. This happens because loose soil after construction creates an active wedge where water can easily flow into it, and create hydrostatic pressure. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Jay Alvarez, suggested they use a non-invasive solution to permanently stabilize the walls. Our foreman used the CarbonArmor System which is flexible carbon fiber fabric straps. The fiber straps are bonded to the inner face of the wall to stabilize it.

This homeowner in Cherry Hill, New Jersey noticed their basement walls were bowing inwards. They contacted Quality 1st Basement Systems and our System Design Specialist, Jack Huber provided a thorough inspection. Jack suggested they use our CarbonArmor Wall Reinforcing System. This will allow the walls to be stable and safe again. Our foreman arrived at the home and began installing the CarbonArmor System, which is a long-lasting, durable system that is ten times stronger than steel. It's applied with an epoxy resin to the wall and will stabilize the foundation wall. When the job was complete, the homeowner was happy with the results and did not experience any more foundation issues!

Are you experiencing sagging floors on your first floor? This is exactly what prompted this Trevose , PA homeowner to contact Quality 1st Basement Systems! After noticing gaps where the molding met the floor, this home owner noticed their basement beams were sagging. Nervous that serious damage could occur, they contacted the experts to provide an inspection. System Design Specialist, Laszlo, recommended our SmartJack Stabilizer System would be the best solution. SmartJacks are designed to provide additional support to weak and sagging beams to restore stability to the floors above.

The floors in the home this  Feasterville Trevose, PA home were sagging. Quality 1st Basement Systems came out and performed a free inspection to figure out what was causing this issue. Our Foundation Specialist, noticed beams and floor joist in the basement were sagging due to high levels of moisture and humidity. The wooden beams were absorbing that moisture, weakening each beam. To provide additional support to the beams and prevent future movement, our team installed our SmartJack System.

This system will not effect the homeowners opportunity to finish the basement in the future. Our team was able to restore this homeowners peace of mind by waterproofing their basement and providing support to their first floor beams.