Before & After Photos

Problem: This Morin-Heights client had an uninsulated crawl space that was wet and left an unpleasant odor through the floor of the first floor. This is why he decided to contact us to receive a free quote.

Solution: The solution chosen during this project was to install our CleanSpace system throughout the crawl space. So to start, our foreman sealed all possible air leaks in the crawl space with expandable foam. Subsequently to redirect the water to the sump pump, a drainage membrane was installed over the entire floor of the crawl space and following it we installed our CleanSpace vapor barrier membrane on top to waterproof everything. Finally, we also installed the SilverGlow, our insulation type EPS laminated with aluminum foil, to insulate this crawl space.

Since our intervention, the humidity of this crawl space has been reduced and the customer now benefits from a better insulated crawl space.

The problem: This Pierrefonds client had a crack in his foundation wall. As we can see in the photo, it was still quite important.

The solution: We injected the crack with a polyurethane and then we covered it with our product called Flexispan. At the crack, we dug a small hole to put a drainage membrane to redirect the water.

In Mr. Birks' basement, there were 2 cracks on the walls of his foundation. When it rained or simply when he turned on his garden hose, water would pass through these cracks and create water infiltration inside. Our client wanted to finish his basement and in order to do that he had to repair these cracks. He therefore contacted Systèmes Sous-sol Québec for a quick solution to eliminate this water infiltration.

 Our experts started by injecting polyurethane into the cracks. This resin goes deep into the cracked wall, unlike methods that simply repair the surface, and goes down to the ground outside. Following the injection, they installed our FlexiSpan wall crack repair system to stop water from coming in.

Polyurethane injection combined with FlexiSpan is a permanent solution to keep wall cracks dry.

Issue:

Mr. Anderson had an old faulty pump that needed to be replaced.

Solution:

Our team replaced his old pump with a more powerful SuperSump. Then the plumber connected the pump to the city sewer.

When the homeowner in Pointe-Claire, QC, wrestled with excess humidity in their basement, they knew it was time to call us. As you can see in the before photo, the space was hardly usable, bogged down by moisture issues. But look at the transformation! After our team stepped in, installing our WaterGuard, SuperSump, the after photo speaks volumes. No more dampness, no more mustiness – just a dry, comfortable basement ready for any purpose. We’re proud to deliver not just a fix, but a lasting solution and peace of mind.