Before & After Photos

This homeowner had a block foundation wall that was bowing in and he was concerned that the wall was going  to collapse. After getting a few estimates, he knew that he needed our help and expertise to fix his bowing wall.

We sent System Design Specialist Mike Portel to inspect the bowing wall and determine what was causing this. Mike found that the soil on the outside of the block wall foundation, causing the wall foundation to fall inwards. He also noticed that there were cracks in the wall that appeared to have grown over time. Mike and the team installed PowerBraces so that the homeowner could move his foundation walls back to their position over time.

The homeowner was very happy with the quality of work and with the professionalism of the group. Check out his new PowerBrace System. 

When our team walked into this home through the front door, there was an obvious bounce in the floor. Upon investigation, the floor was being held up by telephone poles that were cut to fit but they were not strong enough to hold keep holding the home up. Also, the floor was not level. The homeowner was concerned about the bounce and the ability of the floor to withstand weight since it was not supported very well. We fixed the problem by adding SmartJacks to the crawlspace to hold up the floor. There are 2 supplemental beams that run the length of the house. We added 5 Smartjacks to the front of the home and 5 more SmartJacks to the back of the home. We also added a supplemental beam in-between the existing cinderblock supports to finish supporting the house/floor from sagging and bouncing.  

The floor of this garge simply crumbled and cracked during the installation of the waterproofing system.  The original pour of this concrete was horrible.  It was not mixed correctly and was certainly too thin.  We completely removed the floor, waterproofed the garage and restored the floor.

Take a look and see how a several inch uneven concrete sidewalk is easily lifted into place with PolyLevel Injection.

Erin V. was having trouble with their sump pump working correctly. They missed their annual maintenance and needed to a quick fix before it rained again due to fears of causing damage to their home.  So, they decided to call Midwest Foundation Repair.

Service Technician Ryan Allen arrived at the home and was able to see high amounts of sediment in pits. We installed 2 new sump pumps and also put a new battery in for the battery backup system. The team also clean out the pit and removed any debris and cleaned the area to ensure optimal operation for the systems. We were able to provide this customer a peace of mind knowing the system was back up and running again.