Before & After Photos

Tamyara and Donnie were trying to sell their house but wanted to fix the sidewalk at the front of their home. They contacted us at Ayers Basement System to find a solution for the walkway. After an inspection, the team concluded that PolyLevel would be ideal. PolyLevel is a process where foam is inserted below the cement, allowing the team to level and permanently stabilize the cement. Tamyara and Donnie were thrilled with the installation; it went smoothly and looked great!

The Ayers team successfully repaired the cracked and uneven concrete sidewalk at a Church in Berrien Springs. They removed the damaged concrete sections, prepped the area, and poured new concrete, ensuring a smooth and safe surface for churchgoers. The fresh concrete was then leveled and finished to match the surrounding areas, providing a durable and aesthetically pleasing result.

Uneven concrete was making snow blowing a challenge and causing chips along the edges of this customer's driveway. Concerned about further damage from harsh weather, they turned to Ayers for a lasting solution. Using PolyLevel, we leveled the driveway slabs for a smooth surface, and NexusPro sealant was applied to protect the joints from future wear. The result? A driveway that’s easy to maintain, weather-protected, and looks like new! The customer couldn’t be happier with the transformation.

Have you ever been walking on an old sidewalk that has all sorts of unlevel slabs and cracks everywhere? Well, that's the same story for this homeowner's garage. It has huge unsafe cracks that he wants to fix. So we drove to his home to install our advanced PolyLevel technology.

PolyLevel is a polymer-based injection foam that we blast into the concrete through very small holes. This injection foam raises the concrete to be level again while also making it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Is your driveway cracked and starting to sink in spots? Don't worry this is common for many homeowners, and we have the perfect solution. You might as well get the problem fixed before someone trips, or you decide to sell your home and it decreases the resale value and lets be real, the problem can and will continue to get worse.

To fix sinking concrete we have a great PolyLevel system that can lift your concrete slab back to its original/desired height. PolyLevel is a lot less invasive than mudjacking or even pouring new concrete. Small holes are drilled in the concrete to inject the structural grade polymers, but don't worry the holes are virtually unnoticeable once complete. The material that we inject is also waterproof so there is no chance of it washing out beneath the slab. The best part though is that the cure time is only about 15 minutes, so you can go back to driving, parking, and working on your cement in almost no time.