Before & After Photos

This customer was concerned about their falling and cracked driveway, worried it was only going to get worse. Luckily, we were able to protect this homeowner and others from the tripping hazard. To do this, we used PolyLevel, an injectable foam, to lift and stabilize the concrete. Next, we used NexusPro to seal the joints and cracks and ensure that this driveway would survive harsh weather conditions. 

This homeowner had many cracks in his concrete and was worried that his driveway would cave while driving on it. He has worked with Thrasher in the past and was very happy with the results so he called us to help him with the problem. We used our PolyLevel foam system to even out the concrete and then we sealed the joints and cracks using NexusPro. This will make sure his driveway is safe and protected! 

Robert L. is a proud homeowner in Waynesville, MO and wasn’t content with the appearance of the concrete around his property. The walkway leading to the front door wasn’t sealed properly, the front stoop had multiple cracks, and the driveway had large voids from the concrete settling. Robert was familiar with Thrasher’s reputation and dedication to providing a quality solution, so he gave us a call to come inspect his concrete.

To begin the project, System Design Specialist Miles Bearden arrived in Waynesville, MO to undergo a full inspection of the surrounding concrete. The customer opted to have us install our 2-part concrete protection system that consists of our PolyLevel foam and NexusPro sealer. PolyLevel is installed first by injecting it underneath the concrete to fill the voids and level-out the surface. NexusPro is then applied to all cracks and control joints to permanently prevent any water from entering and causing further damage.

Robert was pleased with the outcome of the project and gave Thrasher a five-star review. He was thrilled to have his concrete looking flush and protected in order to stand the test of time.

This customer's sidewalk was uneven and cracked, creating both a safety hazard and an eyesore leading up to their home. We addressed the problem by using polyurethane foam to lift and level the slabs, followed by applying silicone caulking to seal the joints. The result is a smooth, safe, and visually improved pathway that enhances the curb appeal of the property.

This customer reached out to us because she had a tripping hazard on her walkway leading to her front door. The soil underneath the concrete was not compacted properly so it was creating voids, causing the concrete to sink. To fix this, we used PolyLevel to lift and level the concrete back to its original position and fill those voids to prevent it from happening again.