Before & After Photos

In Hudson, NH, a homeowner spotted their foundation walls slightly bowing inward, signaling underlying structural issues. As evidenced in the before photo, the foundation's integrity was compromised. Our team swiftly responded by installing PowerBrace, a steel support system designed to stabilize and gradually straighten the foundation. The after photo showcases the remarkable transformation. We not only restored the homeowner's peace of mind but also fortified their home’s foundation for the long haul, upholding our mission of delivering reliable solutions and an outstanding customer experience.

This retaining wall in Chelmsford, MA was leaning on two sides. Erickson Foundation Supportworks repaired the wall with GeoLock wall anchors.

A homeowner in Chelmsford, Massachusetts, had concerns with their front foundation wall. The stairs at the front of their home had been sinking for years and the homeowners think the stairs might be causing the wall to begin to fail. They decided to call EFS for a free inspection and our Design Specialist confirmed their concerns. 

Our production team replaced a 6ft section of the foundation wall to build a new foundation wall using a masonry block. 

In this foundation in Bow, NH you can see the crack that started to form on the foundation. In the second photo, Erickson Foundation Supportworks sealed the crack and installed a Geo-Lock system to stabalize the wall from moving.

This homeowner in Bow, New Hampshire was experiencing the back of their garage bowing outward. The homeowner of 15 years has noticed the problem get slightly worse over time and wanted to look into a repair. Design Specialist John Prince came to the home and inspected the issue. He concluded that the home would benefit from installing geolocks to counteract the wall being pushed outward. 

Crew Lead Scott Crandall and his team came to the home and dug a trench in the garage so that they could internally mount 3 geolocks under the garage floor. They drilled a long threaded rod from the back of the garage to the trench in the garage. Once they drill the rod to the trench they secure large plates to both ends and tighten them to create enough tension to secure the foundation wall. After, they filled the trench and put covers on the geolocks that are on the back of the garage.