Before & After Photos

This customer was having issues of one side of their basement being susceptible to leaking and flooding. Multiple cracks had appeared on one side of the basement due to the houses physical location and its relation to water. The side house also had a window that was leaking water. Since the house was only leaking from one side, we installed our waterproofing system on one side of the basement to save the customer resources. The window received a Well Duct to flow the water into the Water Guard, the floor received our Water Guard and Super Pump Plus, and the walls received our Clean Space Wall to keep the walls dry and looking good. 

When our team checked out this Bethel home, we noticed that they had already had a sump installed in their basement. Unfortunately, this sump was an open model - which can allow insects and other items to fall inside. It also doesn't prevent water from evaporating out of the hole back into the basement, potentially creating problems with odors and mold. We immediately suggested that they switch to the SuperSump. The SuperSump includes the most reliable pump available, a WaterWatch alarm system, and a patented SuperLiner with an airtight lid! These sumps are neat and clean, and won't allow odors or moisture to escape. 

This block wall foundation was leaking every time it rained for these homeowners in their basement. They called us to fix that. We installed a full interior perimeter basement waterproofing system consisting of WaterGuard drains, a SuperSump sump pump with an UltraSump 4 battery back up, and of course the BrightWall panels. The BrightWall panels not only look nice and cover the dirty walls, but they also help drain water to the WaterGuard beneath the floor. 

This home had a damp and musty basement that was affecting the health of the owner and the rest of the house. Like we always say, the best time to waterproof is sooner rather than later. You don't want to put up with a musty basement your whole tenure just to have to fix it because no one will accept the condition of the basement when its time to sell. With WaterGuard drainage, a TripleSafe sump pump, and a SaniDry Sedona dehumidifier, this basement is ready to be cleaned up for a finished look. 

We covered a crack in this basement with the FlexiSpan system. We start by covering the crack with our patented FlexiSpan caulk. We then cover the caulk with foam that is able to lead any water that still may come through the crack. This water is lead to a trench dug in the concrete in the floor of the basement, directly under the crack. We then cover the foam with another layer of caulk. We then cover the entire crack with a BrightWall panel because it looks clean. The whole goal of this system is to seal the crack and allow any water that still may come through to travel to a trench. Other contractors may opt to just seal the crack, which will just lead to larger cracks because they aren't relieving water pressure off the wall.