Before & After Photos

Click on a photo to enlarge.

Basement Waterproofing in Nashville, TN

Before and after install of ThermalDry Carpeted tiles in the basement so that in the unlikely case there is another water intrusion, they are easily removed and replaced instead of ripping up the carpet. 

Basement Waterproofing in Nashville, TN

This commercial customer in Nashville, TN had a major water intrusion issue in the basement of the structure. Since they use the basement for events, we completed a complete waterproofing system. This included the installing of WaterGuard around the inside parameter of the basement, the WaterGuard will carry water to the new TripleSafe sump pump system and pump it out of the basement through the IceGuard and Lawnscape System, away from the structure. We also installed a SaniDry Sedona due to humidity and mold concerns. This will keep humidity under control and prevent mold growth. It will also clean the air and all the nasty smells and odors from excess moisture in the air. For everyone to enjoy the freshest and cleanest air we also installed our Aspen Air purifier system on the main level of the structure. We finished with the install of ThermalDry Carpeted tiles in the basement so that in the unlikely case there is another water intrusion, they are easily removed and replaced instead of ripping up the carpet. 

Cleanspace in Murfreesboro

We installed our Cleanspace liner throughout this customer's crawlspace to seal and insulate the home!

Basement Mold and Storage Solution in Nashville

This Nashville rental had issues with water leaks and mold that needed a permanent solution. This was a valuable storage space that was going unused. By waterproofing the basement and installing TripleSafe sump pump system the home is protected and mold free.

New Sump Pump in Nashville TN

This older sump pump needed to be retired.

Part of the problem is that it was open, stagnate water is never good, but this also contributes to moisture in the air of the home.

The new TripleSafe Sump pump system is installed to house a cast iron pump sitting on a pump stand.

The previous pump sat on bricks submerged in water. The pump stand keeps allows any sediment to settle on the bottom of the liner instead clogging up the pump.

During an annual service appointment, the sump pump will be inspected and cleaned, any sediment in the bottom of the liner will also be cleaned out at that time.

Once fully installed the airtight lid is screwed into place and provides a place for a safety alarm in case of pump ever does stop functioning or water levels rise too high.

The homeowner typically loses power during big storms, so this system also has a backup battery pump, so the basement is still protected even when the power goes out.

The CleanSpace liner wraps the wall to help with moisture from the block but also for a much nicer and brighter appearance.

Electrical cords will be gathered and straightened and ran to a designated electrical outlet.