Find your expert.
Fix your problem.
Breathe easy.
It only takes a few seconds.
Before & After Photos
Click on a photo to enlarge.
Kingstown, MD poor structral support for sagging floors
This is what is known as a lolly column. They are often found in basements when someone is trying to strengthen the sagging floors. As you can see, they rust and bend. Sometimes they even rust so bad that they fall apart.
Poor foundation support gets properly fixed
This is a home that had the outer wall extended to included the porch. The added weight made the so-called supports sink into the ground.
Camden Home Had Sagging Floors
A homeowner in Camden called because they had purchased an old home and the floors were sagging towards the middle of the house. DryZone was able to come in and help by installing the SmartJack Stabilizer. The before picture is what was holding up the home before DryZone was called, and the after picture is the SmartJack we installed for the home.
Camden-Wyoming, DE - Very old supports in a small cellar
This home was built somewhere in the 1930's. There weren't a lot of strict regulations on home building back then like there are today. At some point in the home's history, a homeowner tried to add supports to the sagging floors. The type of jacks that were used are only meant for temporary, light duty usage. When standing in the home, there is a noticeable dip in the floor towards the center of the house. DryZone was able to use the SmartJack support system to drastically improve the supporting structure. The SmartJack system is usually a crawlspace product. In this case, we were able to order longer poles for the jacks to accommodate the basement height. You can see the difference in size, certainly, but its the clean threads on the screws that make this system truly superior. The zinc plating on a SmartJack means that it will resist corrosion and can easily be adjusted if the need should arise.
Fixing a broken concrete floor with slab piers
A concrete slab is very thick and heavy. When the ground beneath it gets washed away or settles, there are large voids left behind. Most slabs are poured directly on the dirt, so nothing else is supporting them. When the dirt is gone, the slab cracks. A slab pier system is designed to support the slab on heavy soils found far below the surface. When the DryZone crew starts to try and lift, many of the cracks will close up a little.