Before & After Photos

This concrete patio slab has sunk nearly 3" over time, causing water to pool near the home's foundation and a 3 inch void between the concrete and landscaping block of the attached staircase.  Our Team was able to raise the concrete patio slab over 4 inches with our trusted PolyLEVEL System to allow for proper drainage after it rains and raised the staircase enough to fill the initial void.  

John S. of Worthington, MN had water leaking into his basement and cracked foundation walls, making him feel nervous about water moisture and the structural build of his home. He did some research online and came across American Waterworks. He called our office staff and scheduled a FREE Estimate with our Design Specialist, Eric Hazelton. Eric went to his home, examined the problems, and came up with a solution that fit his home repair needs. John was confident in Eric's proposal, so he went ahead with the project. 

Our Foreman, Juan Pena, and his production team began the project by cutting out the concrete floor perimeter with a jackhammer, forming a trench. In the trench, our team installed our WaterGuard System, which is made to prevent water clogs, serve as an underground drain, and collect water leakage from basement walls. Next, our crew installed our CleanSpace Wall Vapor Barrier, which is made to prevent humidity and mold build-up, cover any holes or divots, and provide the room with a neat and clean appearance. Lastly, Juan and his team installed our foundation repair PowerBraces. Our PowerBraces are made to stabilize failing basement walls and provide the potential to straighten walls over time. PowerBraces can be tightened over time to make bowing or tilting walls straighter and more vertical. To complete the project, our team covered the open floor gaps with rock and replaced the concrete. John was thrilled with the project! 

John S. of Worthington, MN had a bucking foundation wall, causing water to leak through it and make his basement wet. He went online and saw that American Waterworks provides free estimates. He called our office line and scheduled an appointment with our Design Specialist team. Our Design Specialist went to his house, carefully inspected his problems, and drew out a solution that worked for him and his needs. John was comfortable with the proposal and felt confident in our products, so he went ahead with the installation. 

Our Foreman and his production team began the installation by breaking out the concrete floor perimeter with a jackhammer, forming a trench. In the trench, our team installed our WaterGuard System, which prevents water and mud clogs and collects water seepage from basement walls. Next, our team installed our CleanSpace Wall System Vapor Barrier around the wall perimeter, which is made to prevent mold and humidity and acts as an extra wall protectant. Lastly, our Foreman and his crew installed our PowerBraces around the wall perimeter on top of the CleanSpace. Our PowerBraces are made to stabilize failing basement walls, providing the potential to straighten them over time. To complete the installation, our production team filled the open floor gaps with river rock and applied new concrete over them. John was ecstatic with the repairs and had a great experience with our team from start to finish! 

A customer from Worthington, MN got in contact with us when they began to notice unwanted water entering their crawl space beneath their home. Our customer was afraid that if the issue was left unresolved, he would run the risk of mold and mildew forming, which could impact the structural integrity of the home. When he called in, he used his FREE estimate to have our Design Specialist, Dylan W., out to his property to assess the situation. Once Dylan had completed his walkthrough, he was able to make recommendations as to how we could help. He recommended the use of our crawl space vapor barrier to encapsulate the space. He explained that this barrier works to trap moisture beneath it and drain it out to the appropriate disposal site. Our customer agreed and work began shortly after. 

Our Foreman Dakota and his crew ended up installing 1,308 sqft of CleanSpace throughout the basement and now our customer doesn't need to worry about unwanted water in their crawl space!

A homeowner in Worthington, MN, discovered water damage in their basement. Wanting to get ahead of the issue, the homeowner looked for a solution. The homeowner did a quick Google search and came across our website. After reviewing our award-winning waterproofing services, the homeowner knew we were the company for them. The homeowner signed up for their FREE estimate on our website. When the estimated appointments were made, the plans were sent to our Foreman, Jeremiah, and his crew. When they arrived at the home, they began by installing the WaterGuard around the perimeter of the basement. Once the WaterGuard was installed, the crew removed the old sump pump and replaced it with the SuperSump+. The crew connected the WaterGuard and SuperSump+ with a feedline. To conclude the installation, the crew installed the IceGuard on the outside discharge line. After all the products were installed, the crew cleaned up their materials and left the home. The homeowner was relieved to know their basement was properly waterproofed. American Waterworks is happy to keep another basement dry.